Clay brick has been a standard building material for thousands of years, used both for building walls and as paving
surfaces for roads, pathways, and courtyards. There is nothing more elegant than a driveway, walkway, or patio paved with
brick. Although concrete pavers are somewhat harder and more durable than clay brick, classic brick can still
easily stand up to normal driveway usage, provided they are laid over a good base and maintained regularly. And clay brick is
arguably the most elegant of all paving surfaces and one that always adds value to your home.
Brick pavers are a manufactured product made of clay that is cast in forms, then heat cured, usually in the shape of a
rectangle. Cobblestones, on the other hand, are a natural stone cut into paver shapes; concrete pavers are cast
grey bricks made of Portland cement and aggregate.
In contrast to clay brick used for wall construction, paver bricks are solid, smooth-surfaced clay without holes or gaps.
Most
paver brick is clay-colored and rectangular. Depending on your
choice, you can create a driveway, patio, or walkway that looks like it's been around for 100 years or one that fits
right in with modern house and landscape designs. Should you someday wish to replace the surface, there is a good market for
recycled brick pavers.
Brick Paver Cost
You should be able to buy the materials needed for a brick paver driveway for about $5 per square foot. If you do the job
yourself, the labor will be free. Professional installation will probably start at about $10 to $20 per square foot, although
fancier designs and pricier bricks can drive that price higher. This makes brick pavers a fairly expensive paving material
when compared to poured concrete ($6 to $10 per square foot). Clay brick pavers are also slightly more expensive than
concrete pavers.
Maintenance and Repair
Clay pavers will gradually weather over time under the influence of moisture and ultraviolet rays from the sun. Proper
maintenance can greatly extend the life of your driveway to 25 years or more.
A
glass brick paver driveway should be washed once or twice a
year with a pressure washer. Make sure to remove weeds and dirt from between bricks. After the surface dries for a day
or two, pack the joints with fresh sand if it is a loose-fit surface. If the pavers are mortared, repair any cracks with
fresh mortar and let dry fully.
To ensure a long life, the bricks should be sealed after each washing. If left unsealed,
clay brick can begin to flake and peel over time. A sealer
can be applied with a good pump sprayer or can be rolled or brushed over the surface. Seal the sand joints as well as the
surface of the brick, as this will help solidify the sand and prevent weeds and moss from appearing in the joints.
When sealing a paver driveway, use a product designed for clay brick, such as a siloxane-based sealer, which will protect
without changing the appearance of the brick. Avoid gloss-finish sealers, which often result in a splotchy surface. There
are, however, "wet look" sealers that look shiny without actually producing a gloss.
Design
Brick pavers make for a very attractive classic paving surface that can work well with almost any home style.
Permeable bricks paving is a far more attractive
paving surface than poured concrete, but when compared to concrete pavers, the design options are more limited. Brick pavers
can be arranged in different patterns, but the sizes are all rectangular, and colors are limited to browns and reds. Concrete
pavers, on the other hand, come in a wide variety of shapes and sizes, giving you more flexibility.
Brick Paver Installation
Brick pavers can be set in a base of either paver sand or mortar. As with any driveway material, the key
to a good brick paver surface is a well-prepared base—especially when paving a driveway that must support a lot of weight.
Outline the area you intend to pave using layout strings, then remove the soil (or the existing paving) to a depth of at
least 12 inches. Add 8 to 12 inches of gravel to the excavated area, compacting the gravel periodically as you add layers.
Compacting the gravel again after each 2 to 4 inch layer is added. Then add a 1 1/2-inch layer of sand and level it. When the
base is ready, start laying bricks in whatever pattern you like.
Installation usually begins with the perimeter bricks, which are sometimes set in concrete to establish a solid edging
that will hold the field bricks in place. As the field
hollow
bricks are installed, they are periodically flattened and "set" by pounding with a mallet. Bricks can be cut
individually, but it can be much quicker to trim the edges all at once with a handheld circular saw or rented wet saw fitted
with a diamond blade.
Upon completion, the
wall brick surface is flattened and leveled with
a heavy roller, then the cracks between bricks are filled with loose sand or mortar. Sand-setting is an
increasingly preferred method for environmental reasons since it allows rainwater to seep through into the ground.
What Are
Roof Tiles?
Roof tiles are primarily made to keep water out of a home. However, they differ from traditional asphalt shingle roofs in
both their material composition as well as their looks. As far back as the 1600’s, slate tile roofs were being used,
and clay roofs can be traced back as far as 10,000 BC! Slate and clay were popular because they were locally available
materials but as we moved into the 19th century, concrete and metal tiles started to appear on a regular basis.
Why are Roof
Tiles Preferred Over Shingle Roofs?
A shingle roof keeps the water out, and adds color to your home, including
bathroom tiles,
kitchen tiles, etc., but roof tiles provide an unmatched variety of options that are simply not available with
asphalt shingles.
9 Types of Roof Tiles
Roof tiles are a great way to customize a home, but they vary in budget, durability, weight, and appearance. We break
down the 9 most popular types of roof tiles below so that you can get a clear understanding of what sets each material apart.