wholesale Site ESS Product Introduction 鈼?Power module Function The power module integrates rectifier, power distribution and monitoring, converts AC or HVDC into stable 48V DC. It supports fault warning and real-time monitoring data reporting to superior network management platform as well as communication with monitoring equipment MBUS. Appearance (1) Running light (2) Alert light Indicators LightColorStatusMeaning RunningGreenOffNo power input (no AC or no battery input) OnStart/self-check/load (startup and upgrade instantaneous state) Slow flash (0.5Hz)The communication is normal between the module and network Quick flash (4Hz)The communication is abnormal between the module and network AlertRedOffFailure free OnRectifier module failure/address conflict/monitor module failure Slow flash (0.5Hz)Rectifier module protection / rectifier power off / communication failure / rectifier power down /parallel failure / AC over-voltage protection / AC under-voltage protection 鈼?Li-ion battery module Function The Li-ion battery module provides standby power function for communication equipment, and supplies power to communication equipment when there is no power input from the power module, so as to ensure a normal operation and improve power supply reliability. Appearance (1) Running light (2) Alert light Indicator Light Indicator lightColorStatusMeaning Running lightGreenOffCharger fault / communication fault / parallel operation fault / power off Flash (1HZ)Charging / discharging / parallel standby status Alert lightRedOffNo fault OnProtection / fault Flash (1HZ)Warning Installation Instructions 1. Use M6 set screws to fix the hoop retaining plate, holding pole backboard of battery module and of power module. 2. Use the hoop to install the spare parts by holding pole. 3. Use M6 screw to fix the switchover piece of power module on the power module. 4. Use M6 screw to fix the switchover piece of battery module on the battery module. 5. Hang the power module on the holding pole backboard of power module. 6. Hang the battery module on the holding pole backboard of battery module. 7. Lock the top screw. 8. Disassembly is the opposite of installation. ENDwholesale Site ESS website:http://www.coslinkess.com/site-ess/