LED Tube Lights Vs. LED Panel Lights: Which Is Better for Commercial Use: User Insigh
dnfsdd852 > 12-02-2021, 08:26 AM
LED Tube Lights Vs. LED Panel Lights: Which Is Better for Commercial Use: User Insights
For office or working environment LED lights to have the first choice for a long time. Most offices have replaced old fluorescent lights with LED Tubes or LED Panels for better illumination condition and cost effectiveness. But still some offices need to upgrade and they are looking for the best solution you can choose the best from the best and this is why today’s’ article is all about the difference between LED Tubes & LED Panels.
LED Tube Lights
You can select LED Tubes from lots of LED products designed to replace your old T8 lights. LED Tubes are lighter than other bulbs which make it easy to set up. They are less costly and less power ingesting than other lights. LED tube lights decrease the dangerous effect on the environment as they consist of non-toxic gases. These lights offer crystal clear, smooth and stable light. LED tubes of 15W to replace 32W T8, T10 or T12 lamps making the LED 50% more efficient. These tubes have a longer time span of 50,000 hours which is 55 times extended than other lights. LED tubes use drivers that power the LEDs. Some drivers are incorporated in the LED tubes and some decide to use an external driver outside the lights which totally depends on the manufacturers. There are some subtle differences between these designs. More people are asking for LED tubes that can be easily installed as a plug and play version into existing fixture without removing the existing ballasts. Though the installation cost is high, still it’s an investment for the long run.
Advantages
1. LED tube lights can reduce electricity consumption up to 50%
2. LED tubes are recyclable after their life span.
3. The service of LED tube depends on some components like mechanical design, quality of LED, heat management etc.
4. Illumination of Led tubes are better buy some of these tubes are unlikely to be suitable for use in luminaries which are used in emergencies.
5. For many areas like offices, corridors and car parks vertical illumination is important to see someone’s face and read a notice board.
LED Panel Lights
But these days LED surface mounted device panels are now turning into more popular in the modern community for lighting up buildings like offices. They also save energy by improving energy efficiency. LED panels can generate light of full spectrum. Typical sizes for conventional fluorescent light containing troffer fixtures are 2ft*2ft or 2ft*4ft. These correlate with common recessed ceiling panel sizes. We can easily replace LED troffers with fluorescent tube light troffers. We can do this by installing LED strips directly into the aluminium troffer. Manufacturers can create a numerous configuration of power and brightness by changing the number of density of LED stripes. LED troffer can replace a fluorescent fixture consuming two times more energy if it’s well designed. We can give an example of a ballast draw included 3* T8 fluorescent lights that consume 108 watts. A 40w LED troffer can replace the same fixture and it won’t be unreasonable to achieve 40% savings on your utility bill.
Advantages
1. Panel lights are designed to be flexible. Designers design a variety of different shapes & different particles of the light source according to the customer requirement.
2. The illumination of LED panel light is higher and glow is even.
3. Heat dissipation of LED panel light is less than other lights. These lights are slim.
4. Control ability of these lights are strong. LED Panel lights can carry out program control by an external controller and regulate the light color.
5. LED panel lights can change or adjust light color according to the environment and different needs.
6. These lights don’t produce any radiation and glare and can protect eyesight. The light color is also very average.
The light bulb that has lit up our homes since the 1800s was officially on its way out after former President George W. Bush signed the Energy Independence and Security Act of 2007. Although the act didn't ban the use, purchase, sale or manufacture of incandescent bulbs, it did require household light bulbs to have 25 percent greater efficiency (which means 25 percent less energy use) than the traditional bulbs that used between 40 and 100 watts of electricity. The inefficient incandescent, where 90 percent of its energy is given off as heat, had fallen out of favor with the financially and ecologically concerned.
When the new lighting standards began in 2012, prime replacements for the incandescent light bulb were the higher-efficiency compact fluorescent lamps (CFL) and the light emitting diodes (LEDs). The CFL, though, has its own problems, primarily the inclusion of toxic mercury in the design and a strange, sometimes unpleasant color that even gives some people headaches.
An LED is what's called a "solid-state lighting" technology, or SSL. Basically, instead of emitting light from a vacuum (as in an incandescent bulb) or a gas (as in a CFL), an SSL emits light from a piece of solid matter. In the case of a traditional LED, that piece of matter is a semiconductor.
Stated very simply, an LED produces light when an electrical current passes through a microchip, which illuminates the tiny light sources called LEDs and the result is visible light. For a complete explanation, see How Light Emitting Diodes Work.
The problem with LEDs as primary home lighting was that while they emit a lot of light, the structure of an LED caused some of that light to get trapped inside. So, an LED bulb was traditionally dimmer than an incandescent bulb, and most people want their lamps and ceiling fixtures to be pretty bright.
Now, LEDs bulbs have brightened up. You can now find LED replacement bulbs that emit light equivalent to a 60-watt incandescent light bulb or higher, which makes them a viable technology for basic lighting needs at home. And a LED replacement light bulb has a life 24,000 hours longer than that of a traditional incandescent 60-watt bulb.
What Are Solar Lights?
A:Solar lights are lighting systems powered by the sun and come in various colors, designs, and sizes. They can be fixed or portable light fixtures that include rechargeable batteries, photovoltaic solar panels, controllers and LED lamps. Since they are powered by solar radiation they have no wires to connect.
Solar LED light is the best alternative energy source since they are eco-friendly and come from a limitless source.
Solar street lights
A LED street light is powered by solar energy and is used in parking lot areas and along different streets for lighting purposes. It uses a battery plus photovoltaic panel that is charged during daytime for lighting at night. Solar Street light has other features such as motion sensors and remote controls that come in handy when lighting up difficult areas to the wire.
Solar Flood Lights - The Two Piece Option
LED Flood Light is the best alternative for lighting a larger area. They are motion-activated and provide extra lighting, which works perfectly for security purposes. With solar flood lights, you do not need to worry about an extension cable or replace your batteries. Other perks that make the solar flood lights increase in demand include the following:
? They have a timer and brightness option.
? They can stay on for up to eight hours without charging.
? Motion sensors for detecting movement around your premises.
? The motion sensors help conserve energy since they only light up when there’s movement in the area.
“High Bay Lighting” Defined
Most businesses that own and operate warehouses, factories, and distribution centers have heard of “high bay lights”. But before we get into the latest technologies and their advantages, we wanted to unpack what “high bay lights” actually are and where they are most commonly found.
What are High Bay Lights?
“High bay lights” are typically defined as those lights which are 20 feet or more above the ground. Most often used in gymnasiums, warehouses, factories, and distribution centers, high bay lights are powerful lights that are capable of evenly illuminating large spaces with little to no glare.
If you can remember the good old days, think of your old high school gym. Remember those big canister lights that hung down from the ceiling, high among the rafters? Those were high bay lights.
High bay lights are typically used in industrial, warehouse, manufacturing, and aviation settings. Although high bay lights used to mostly be round, there are now round, linear (and other) LED high bay lights – depending on the application. Whether round or linear, their form comes primarily from their function, rather than the desired design aesthetic.