How to clean gas heads
Gas heads can be cleaned by preparing a set of materials and tools, then following the steps as follows:
Required materials and tools:
Baking soda jelly liquid. Unused toothbrush. paperclip Non-abrasive sponge.
Cleaning method:
Remove the ceramic disc of the gas burner, or turn off the butane valve before starting to clean, remove the heads and eyes from their places, soak them in warm soapy water for up to 20-30 minutes, then clean them with a non-abrasive sponge and an unused toothbrush
Clean the food residues stuck in the outlet slots with a paper clip, by inserting it into the slot in a way that does not lead to damaging the metal of the outlet, and it should be noted not to use toothpicks in this matter, as some wood may get stuck and lead to closing the passages.
Baking soda can be used to clean the gas heads to get rid of the most difficult stains, by mixing equal amounts of water and baking soda, applying the solution to the heads, then rubbing them with a toothbrush and a lint-free, non-abrasive cloth.
This would require gas cleaning to repeat the process over and over again, at last all the pieces being washed with copious running water, then thoroughly dried before being reassembled and put back in their places.
How to clean butane rods
The process of cleaning the butane gas grates requires the availability of some materials and tools, then following some steps as follows: Materials and tools: about two liters of water. Half a cup of baking powder. two big spoons of lemon juice. Plastic cleaning brush. piece of cloth.
cleaning method
The process of cleaning the boards begins with using a plastic brush to scrub the leftover food stuck to it, mixing a solution of warm water with half a cup of baking powder and two tablespoons of lemon juice in a plastic bowl, and placing the bars in it. He. She
leaving it to soak overnight, or at least eight hours, followed by brushing it well with a plastic brush; In order to get rid of the combustion residue, and finally the bars are washed with warm water, dried with a cloth, and put back in place.
Gas rod deep cleaning
The process of deep cleaning the gas rods requires the availability of some materials and tools, then following some of the following steps: Materials and necessary tools: A plastic bag that matches the size of the gas rods. ammonia. dry cloth. Rubbing cloth. water.
cleaning method
The cleaning process begins with removing the gas rods, placing each one in a bag, then adding 1/4 cup of ammonia and enough water to all of the bags so that the rods are completely submerged.
Then close the bags in a way that prevents the leakage of ammonia and water during the necessary soaking period, so it is preferable that the bars remain in the solution for a whole night, and when they are removed from the bags they are rubbed, washed and dried
TRANSLATED FROM:
[font='Helvetica Neue', Helvetica, Arial, sans-serif]مادة تلميع الرخام[/font]
طريقة تنظيف الشبابيك
بخاخ تنظيف السجاد